furnace heating repairfurnace repair image

Some More Common Furnace Repair Issues.

Furnaces are extremely essential to every home owner, particularly throughout the chilly winter days. They keep your house at a cozy temp when the weather outside may literally be freezing! As with just about any household equipment, furnace repair is sometimes required to maintain your home’s heated temps.

If you have a gas heat method, it’s important to be mindful of any leaking issues which may turn up. Typically you can identify a gas leak by a sulfur smell. If you do start to smell natural gas, it’s very important to turn off the furnace and call your gas company or technician right away. If the odor is powerful, they’ll tell that you leave the property both for your own wellness and to keep you out of danger in case the gas ignites. Any kind of spark could trigger severe consequences.

When your pilot light just will not remain ignited, you may have one of numerous problems. The thermocouple might be loose, needing a technician’s maintenance. Or the orifice could be plugged, not permitting gas to come through. You can literally repair this issue with a thin piece of wire and some diy furnace repair work. Turn off the gas and shut off the furnace at the circuit breaker beforehand, then stick a thin piece of wire into the small hole from where the gas comes through to supply the pilot light. This technique should knock out any sort of ash or additional fragments that is clogging the tube. Ultimately, your gas flow may be turned down too low to keep the fire lit. Your owner’s manual will give information on just how the flame should look and how to readjust the amount of gas to attain the ideal flame.

If you sense that your furnace doesn’t appear to be giving out sufficient heat, there are several parts to check out before you contact the professional. Check to see if anything is blocking the flow of warm air – perhaps a piece of furniture, a kid’s toy bin, a pillow, or other accidental item. Ensure that your thermostat is set correctly. You may want to increase the temp about 5 degrees and see if that kicks the furnace on. Examine the room’s heating registers. These may not be opened. One can also check on the filtering system, because a dirty filter may block the air flow. If you find a filthy filter, replace it with a brand-new one and see if that strengthens the heating system. Ultimately, if all those measures prove fruitless, it’s about time to call an expert furnace repair technician.

In some cases the heating unit might be shut off by a tripped circuit breaker or perhaps a popped fuse, thus if you’re unit doesn’t seem to be working at all, there are a number of items you can examine. Very first of all, ensure the thermostat is set to temperature. If it’s been switched over to the cooling or off location, it won’t switch the heat on. Examine the circuit breaker and make sure the switches are set to the on status. Make sure that the heating unit’s switch is switched on, and possibly reset the motor if it has to be reset. If all else fails, it’s time to contact your technician or service company!

 

How to setup a zone valve.

We found this great video on how to setup a zone valve: http://www.thisoldhouse.com/toh/video/0,,20045338,00.html Enjoy!